GKF horizontal scraper unloading centrifuge

Main features:

1. Adopting PLC and touch screen control, it runs automatically according to the predetermined program, enabling human-machine dialogue and convenient operation and maintenance.

2. The action components are controlled by electrical hydraulic automatic control. Monitoring the entire process including pre feeding cleaning, feeding, initial filtration, washing, fine filtration, unloading, gas blowback, and batch cleaning.

3. Independent electrical control box for remote control.

4. Safety protection: speed detection, over vibration protection, cover opening protection, motor overload and overheating protection, scraper rotating mechanical and electrical dual protection.

5. The rack adopts a fully welded structure, which is compact and has high load-bearing strength. Partition wall design, transmission, machine base, motor, and hydraulic system are all installed in the non clean area. The drum and casing are located in the clean area, and the rack panel is flexibly connected to the wall to isolate the clean area from the non clean area.

6. The casing is in the form of a large flip cover, which facilitates complete cleaning of the drum; Quick opening hydraulic locking structure, easy to operate.

7. The motor and centrifuge host are installed as a whole, which is convenient for users to install and use, and reduces the space occupied by the machine.

8. Fully enclosed structure, with sealing components made of silicone rubber or fluororubber.

9. Adopting frequency conversion control, the drum speed is infinitely adjustable. The speed of feeding, washing, separation, unloading, and residual filter cake blowing can be set according to the process requirements.

10. Design vibration isolation devices and rubber vibration reduction foundations to ensure smooth machine operation, greatly reduce vibration and noise, improve production workshops and working environments, and minimize the harm of machine vibration to equipment and the environment.

11. The material of the contact part between the centrifuge and the separation medium is made of stainless steel, which improves the corrosion resistance and hygiene requirements of the machine.

12. Configure a gas blowback device (optional) to assist the scraper in scraping during material scraping, reducing residual filter cake layers.

13. Configure an online cleaning system (optional), with multiple cleaning heads installed inside the centrifuge, such as on the outer surface of the drum, discharge hopper, sight glass, and at the bottom of the drum, which can be washed online (in place) to meet the cleanliness requirements of the process.

14. Configure a nitrogen protection system (optional), inject nitrogen into the working area of the centrifuge, and have the nitrogen concentration/pressure automatically controlled by the control system to meet explosion-proof requirements.

product mix

Technical Parameter