IL type vertical centrifugal discharge centrifuge

Product Structure Principle

The inner wall of the cone orchid is equipped with a filter screen, without a distributor or accelerator. It is driven by an electric motor to rotate at high speed. The suspension is added through the feed pipe, evenly distributed through the distributor, and accelerated before entering the small end filter screen of the cone orchid. Under the action of centrifugal force, the liquid is discharged from the cone through the filter screen and small holes on the cone. Solid particles form a filter cake on the filter screen and slide towards the larger end of the cone. As the diameter of the drum increases, the centrifugal force also increases. The filter cake gradually becomes thinner in the cone orchid, resulting in further dehydration. When the filter cake moves to the large end of the cone, it continuously flies out of the drum along the tangential direction under the action of inertia force and falls into the aggregate chamber of the shell for unloading.

Product features and main uses

The L-type vertical centrifugal discharge centrifuge is a filtering centrifuge that continuously performs feeding, separation, drying, and discharge at full speed.

This machine has a simple structure, high efficiency, large processing capacity, low operating and maintenance costs, and the parts in contact with materials are made of stainless steel with good corrosion resistance.

This machine is suitable for separating crystalline particles larger than 0.1mm, amorphous materials, and fiber materials such as sugar paste, coal slurry, ammonium bicarbonate, salt, adhesive fibers, plastic particles, etc.

hot tip

1. Technical parameters shall be subject to the product manual.

2. When inquiring, please ask the customer to provide detailed material characteristic parameters and working condition requirements.

3. According to the special needs of customers, we can adopt personalized design and manufacturing:

Material: The material in contact with the material can be ordinary stainless steel, special stainless steel, or titanium alloy.

Can be designed and manufactured according to GMP standards.

Other technical requirements can be agreed upon.

Main specifications and parameters of the product